FIREWORKS

  
    OK, SO YOU WANT TO KNOW HOW TO MAKE YOUR OWN FIREWORKS?  NOTE: ALL
    THE AMOUNTS GIVEN IN THESE DIRECTIONS ARE IN PARTS BY WEIGHT.  DO NOT
    USE PARTS BY VOLUME (LIKE TEASPOONS OR SOMETHING), OR ELSE YOU COULD
    HAVE A SERIOUS PROBLEM. ALWAYS MIX THESE CHEMICALS BY SHAKING THEM ON
    A SHEET OF PAPER OR SOMETHING. IF YOU GRIND THEM, STIR THEM, ETC.
    THEY COULD EXPLODE IN YOUR FACE!(AFTER ALL, I DON'T WANT YOU TO KILL
    YOURSELF WHILE DOING THIS!)

    FUSE:
  
    1. DISSOLVE AS MUCH POTASSIUM NITRATE AS YOU CAN IN ABOUT A PINT OF
    WATER AT ROOM TEMPERATURE.
  
    2. SOAK 5-6 INCH PIECES OF STRING OR PAPER IN THIS SOLUTION AND LET
    THEM DRY.

    3. LIGHT THE FIREWORKS WITH THE STRING OR A PIECE OF PAPER ROLLED
    INTO A TIGHT TUBE.

    FLASH POWDER:    
  
    1. MIX:  1 PARTS POWDERED MAGNESIUM METAL and 4 PARTS POWDERED POTASSIUM
    NITRATE.
  
    2. IGNITE WITH A VERY LONG FUSE.  THIS STUFF EXPLODES WITH A HUGE
    WHITE FLASH, AND MAY BE BRIGHT ENOUGH TO SCREW UP YOUR EYES IF YOU
    LOOK STRAIGHT AT IT.

    "SNAKES":
  
    1. MIX:  5 PARTS POTASSIUM NITRATE
            10 PARTS POTASSIUM DICHROMATE
             5 PARTS REGULAR SUGAR

    2. MIX THESE POWDERS WITH ENOUGH MUCILAGE OF ACACIA (THAT GOOEY
    BROWN GLUE YOU CAN GET AT A DRUGSTORE) SO THAT YOU CAN MOLD THEM INTO
    CONES ABOUT 1/2 AN INCH HIGH.
      
    3. WHEN DRY, LIGHT THE TIPS OF THE CONES WITH A MATCH.

    FOUNTAIN #1:
  
    1. MIX:  1 PART POWDERED MAGNESIUM METAL
             1 PART POWDERED IRON METAL
             1 PART POWDERED ZINC METAL
             1 PART ANTIMONY SULFIDE
             1 PART POWDERED CHARCOAL
             1 PART POWDERED SULFUR
             1 PART LYCOPODIUM POWDER
             1 PART POWDERED SUGAR
             1 PART POTASSIUM NITRATE

    2. COAT A CARDBOARD TUBE AND PLUG THE BOTTOM WITH PLASTER OF PARIS
    (THIS IS SO IT WON'T BURN).

    3. FILL THE TUBE WITH THE MIXTURE, INSERT A FUSE, AND LIGHT IT.

  

H I G H W A Y R A D A R J A M M I N G

    Most drivers wanting to make better time on the open road will arm
    themselves with an expensive radar detector.  However this device
    will not work against a gun type radar unit in which the radar signal
    is not present until the cop has you car in his sights and pull the
    trigger. Then it is too late to slow down.
  
    A better method is to continuously jam any signal with a radar signal
    of your own. I have tested this idea with the cooperation of a local
    cop and found that his unit reads random numbers when your car
    approached him. It is surprisingly easy to make a low power radar
    transmitter.  A nifty little semiconductor called a Gunn diode will
    generate microwaves when supplied with 5 to 10 vdc and enclosed in
    the correct size cavity (resonator). An 8 to 3 terminal regulator can
    be used to get this voltage from a car's system.  However the correct
    construction and tuning of the cavity is difficult without good
    microwave measurement equipment.  Police radars commonly operate on
    the K band at 22 ghz. or more often on the X band at 10.525 ghz.
  
    Most microwave intruder alarms and motion detectors (mounted over
    automatic doors in supermarkets, etc.) contain a Gunn type
    transmitter/receiver combination that transmits about 10 milliwatts
    at 10.525 ghz.  These units work perfectly as jammers.  If you can't
    get one locally write to Microwave Associates in Burlington, Mass.
    and ask for info on "Gunnplexers" for ham radio use.  When you get
    the unit it may be mounted in a plastic box on the dash or in a
    weatherproof enclosure behind the plastic grille.  Switch on the
    power when on the open highway.  The unit will not jam radar to the
    side of behind the car so don't go speeding past the radar trap.
 
    An interesting phenomena you will notice is that drivers in front of
    you who are using detectors will hit their brakes as you approach
    large metal signs or bridges.  Your signal is bouncing off these
    objects and triggering their detectors.

P Y R O M A N I A C T E C H N I Q U E S

    IMPACT GRENADES

    1] MIX SOLID NITRIC IODINE WITH HOUSE-HOLD AMMONIA
    2] WAIT OVERNIGHT
    3] POUR OFF THE LIQUID
    4] LET THE 'MUD' ON THE BOTTOM DRY...   (IT'S LIKE CONCRETE)
    5] THROW IT AT SOMETHING!!!

    SMOKE BOMBS

    1] MIX :     3 PARTS SUGAR TO 6 PARTS EPSON SALTS
    2] PUT IT IN A TINCAN (COFFEE CAN WILL DO)
    3] HEAT IT OVER LOW FLAME (LIKE A CIGARETTE LIGHTER)
    4] LET GEL AND HARDEN
    5] PUT A MATCH IN AS A FUSE.
    6] LIGHT IT AND RUN LIKE HELL........(4 POUNDS OF THE STUFF WILL FILL
    A CITY
    BLOCK WITH THICK WHITE SMOKE

    MEDIUM-GRADE EXPLOSIVES

    1] MIX :  7 PARTS POTASSIUM CHLORATE
    1 PART VASELINE
    2] TO IGNITE, USE AN ELECTRIC CHARGE OR   A FUSE.

    CAR BOMB

    1] PUT LIQUID DRANO INTO A PRESCRIPTION BOTTLE (THE SMALL BROWN PILL
    BOTTLES)
    2] CLOSE THE LID AND POP IT INTO THE GAS TANK (OR A BOTTLE OF
    GASOLINE IF YOU  
    
    WANT TO MAKE A SIMPLE TIME-BOMB)
    3] WAIT 5 MINUTES.....
    4] RUN LIKE HELL

    PLASTIC EXPLOSIVES

    1] MIX :    2 PARTS VASELINE 1 PART GASOLINE
    2] IGNITE IT WITH AN ELECTRIC CHARGE.

    ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
  
    L O C K   P I C K I N G                    


    SO YOU WANT TO BE A CRIMINAL. WELL, IF YOU ARE WANTING TO BE LIKE
    JAMES BOND AND OPEN A LOCK IN FIFTEEN SECONDS, GO TO HOLLYWOOD
    BECAUSE THAT'S THE ONLY PLACE YOUR GONNA DO IT. EVEN EXPERIENCED
    LOCKSMITHS CAN SPEND 5 TO 10 MINUTES ON A LOCK IF THEY'RE UNLUCKY. IF
    YOU ARE LOOKING FOR EXTREMELY QUICK ACCESS, LOOK ELSEWHERE.
 
    THE FOLLOWING INSTRUCTIONS WILL PERTAIN MOSTLY TO THE "LOCK-IN-KNOB"
    TYPE LOCK, SINCE IT IS THE EASIEST TO PICK. IF THERE IS SUFFICIENT
    DEMAND, I WILL LATER WRITE A FILE DISCUSSING THE OTHER FORMS OF
    ENTRANCE, INCLUDING DEAD-BOLT

    FIRST OF ALL, YOU NEED A PICK SET. IF YOU KNOW A LOCKSMITH, GET HIM
    TO MAKE YOU A SET. THIS WILL BE THE BEST POSSIBLE SET FOR YOU TO USE.
    IF YOU FIND A LOCKSMITH WILLING TO SUPPLY A SET, DON'T GIVE UP HOPE.
    IT IS POSSIBLE TO MAKE YOUR OWN, IF YOU HAVE ACCESS TO A GRINDER (YOU
    CAN USE A FILE, BUT IT TAKES FOREVER.)

    THE THING YOU NEED IS AN ALLEN WRENCH SET (VERY SMALL). THESE SHOULD
    BE SMALL ENOUGH TO FIT INTO THE KEYHOLE SLOT. NOW, BEND THE LONG END
    OF THE ALLEN WRENCH AT A SLIGHT ANGLE..(NOT 90 DEG.) IT SHOULD LOOK
    SOMETHING LIKE THIS:

  #1
       \\
        \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\s\\\\\\\         (THIS IS THE HANDLE
                                                 \\\    THAT WAS ALREADY
                                                  \\\   HERE.)
                                                   \\\
                                                    \\\
                                                     \\\

    NOW, TAKE YOUR PICK TO A GRINDER OR A FILE AND SMOOTH THE END (#1)
    UNTIL IT'S ROUNDED SO IT WON'T HANG INSIDE THE LOCK.  TEST YOUR TOOL
    OUT ON DOORKNOBS AT YOUR HOUSE TO SEE IF IT WILL SLIDE IN AND OUT
    SMOOTHLY.

    NOW, THIS IS WHERE THE SCREWDRIVER COMES IN. IS IT SMALL ENOUGH FOR
    IT AND YOUR PICK TO BE USED IN THE SAME LOCK AT THE SAME TIME, ONE
    ABOVE THE OTHER ? LETS HOPE SO, BECAUSE THAT'S THE ONLY WAY YOUR
    GONNA OPEN IT.

    IN THE COMING INSTRUCTIONS, PLEASE REFER TO THIS CHART OF THE
    INTERIOR OF A LOCK:

    XXXXXXXXXXXXXXXXXXXXXXX| K
     #  #  #  #   #   #    | E
        #     #   #   #    | Y
     *     *               | sH
     *  *  *  *   *   *    | O
                           | L
                           | E
    XXXXXXXXXXXXXXXXXXXXXXX|

    #= UPPER TUMLER PIN
    *= LOWER TUMLER PIN
    X= CYLINDER WALL

    (THIS IS A GREATLY SIMPLIFIED DRAWING)

    THE OBJECT IS TO PRESS THE PIN UP SO THAT THE SPAcE BETWEEN THE
    UPPER PIN AND THE LOWER PIN IS LEVEL WITH THE CYLINDER WALL. NOW, IF
    YOU PUSH A PIN UP, ITS TENDENCY IS TO FALL BACK DOWN, RIGHT ? THAT IS
    WHERE THE SCREWDRIVER COMES IN.

    INSERT THE SCREWDRIVER INTO THE SLOT AND TURN. THIS TENSION WILL KEEP
    THE "SOLVED" PINS FROM FALLING BACK DOWN. NOW, WORK FROM THE BACK OF
    THE LOCK TO THE FRONT, AND WHEN YOU'RE THROUGH.....
    THERE WILL BE A CLICK, THE SCREWDRIVER WILL TURN FREELY, AND THE DOOR
    WILL OPEN. DON'T GET DISCOURAGE ON YOUR FIRST TRY! IT WILL PROBABLY
    TAKE YOU ABOUT 20-30 MINUTES YOUR FIRST TIME. AFTER THAT YOU WILL
    QUICKLY IMPROVE WITH PRACTICE.

    THIS IS BY NO MEANS THE MOST EFFICIENT WAY OF ENTERING A HOUSE. IF
    YOU WOULD LIKE ANOTHER ITEM OR TWO DEVOTED TO THESE OTHER WAYS, LET
    THE SYSOP KNOW.

    ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
  
           How to Make a Land mine
                     by
           Merlin and Black knight

    First you need to get a push button switch... take the wires of it
    and connect one to a 9 volt battery connector and the other to a
    solar igniter (if you can't get that then use a thin piece of stereo
    wire).

    Connect the other wire of the 9 volt connector to to the other end of
    the solar igniter (stereo wire).

    Now... connect the end of a fuse (of a pipe bomb, M80, whatever has a
    fuse) to the solar igniter...

    Dig a hole... not to deep but enough to cover all the materials.
    Think about what direction your enemy will coming from and plant the
    switch, but leave the button visible (not to visible). Plant the
    explosive about 3 feet from the switch because there will be a delay
    in the explosion. And when your enemy steps on it...
       B  O  O  M  !  !  !
       -------------------
    ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
  

FIREBOMBS

    Most fire bombs are simply gasoline filled bottles with a fuel
    soaked rag in the mouth (the bottle's mouth, not yours). The original
    Molotov cocktail, and still about the best, was a mixture of one part
    gasoline and one part motor oil. The oil helps it to cling to what it
    splatters on.

    Some use one part roofing tar and one part gasoline. Fire bombs have
    been found which were made by pouring melted wax into gasoline.


                                NAPALM

    About the best fire bomb is napalm. It has a thick consistency,
    like jam and is best for use on vehicles or buildings.

    Napalms is simply one part gasoline and one part soap. The soap is
    either soap flakes or shredded bar soap. Detergents won't do.

    The gasoline must be heated in order for the soap to melt. The usual
    way is with a double boiler where the top part has at least a two-
    quart capacity. The water in the bottom part is brought to a boil and
    the double boiler is taken from the stove and carried to where there
    is no flame.

    Then one part, by volume, of gasoline is put in the top part and
    allowed to heat as much as it will and the soap is added and the mess
    is stirred until it thickens. A better way to heat gasoline is to
    fill a bathtub with water as hot as you can get it. It will hold its
    heat longer and permit a much larger container than will the double
    boiler.


                           MATCH HEAD BOMB

    Simple safety match heads in a pipe, capped at both ends, make a
    devastating bomb. It is set off with a regular fuse

    A plastic Baggie is put into the pipe before the heads go in to
    prevent detonation by contact with the metal.

    Cutting enough match heads to fill the pipe can be tedious work for
    one but an evening's fun for the family if you can drag them away
    from the TV.


                       FUSE IGNITION FIRE BOMB

    A four strand homemade fuse is used for this. It burns like fury.
    It is held down and concealed by a strip of bent tin cut from a can.
    The exposed end of the fuse is dipped into the flare igniter. To use
    this one, you light the fuse and hold the fire bomb until the fuse
    has burned out of sight under the tin. Then throw it and when it
    breaks, the burning fuse will ignite the contents.

    ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ

EXPLOSIONS

: Effective demolition.
  
    We will be using this brand of Pipe Bomb in most all of our
    elimination exploits:

    One 1 foot length of pipe (threaded)
    two caps for the ends of the pipe.
    one baby-food jar
    about a baby-food jar full worth of vinegar
    baking soda
    some gravel

    To construct the pipe bomb:

    1. Cap one end of the pipe with a metal cap TIGHTLY!
    2. Fill the baby-food jar with vinegar, cover, AND WIPE CLEAN!
    3. Drop the baby-food jar into the pipe lightly as not to break, and
    add some gravel.
    4. Pour baking soda to the rim into the pipe bomb.
    5. Cap the other end very tightly.

    Synopsis:

    Once you crack the pipe hard enough to break the baby food jar, it
    will cause the baking soda to create such pressure, that it will
    explode.  The explosion is more than effective.  Rumor has it that
    when it was thrown into an old car, it blew the doors about ten feet
    away, and the roof three feet into the air. When this device was
    constructed by myself, I just stuck it under an old tree, and it was
    removed. You have about five minutes to wait, so you might still have
    time to acquire a quick alibi.

    USING THE PIPE/PRESSURE BOMB

    Someone you hate? Well, creep out of your house REAL LATE at night
    (3-4:00) and walk up to their house. Crack it to start on the
    driveway, and throw under the car.  Run home, then read the police
    reports. Once you have been better acquainted with device, it can be
    used to help you out.  Throw it under the stage of a play, or leave
    it in the bathroom of your school, etc.
  
    MOLOTOV COCKTAILS IMPROVED
  
    Well, the original Molotov cocktail was used differently..  Its not
    REALLY improved, but its better this way.  Molotov created this
    weapon in the Russian revolution (give them a taste of their own
    medicine) and the formula was 50% gasoline, alcohol, and 50% oil.
    With the oil, it sticks to what it hits. Much more effective...

    MODIFYING MOST SEMI-AUTOMATICS

    Whats this B.S. about spending $3000 for a full-auto kit?  All we did
    was file down the firing pin, and it worked almost perfectly.  File
    down the part by the springs that rubs against the tracks, so it is
    free.  This works best with a good-old M-16, or most HK rifles.

    SURVIVALIST PYROTECHNICS

    It is almost imperative for the modern-day snow camper to carry
    around a bit of gasoline (I know, only the shitbaits do that, but the
    wind gets pretty rough out there) with you.  Once that much has been
    done, you are ready for the Survivalist's bomb: in other files, the
    GENERIC BOMB.  This bomb is infamous among bulletin boards, but
    because it suits this method better, I call it the survivalist's bomb.

    1 jar, pipe, etc. few drops of gasoline. a few drops of potassium
    permanganate found in most all snakebite kits

    I.   Put in a few drops of gas into the jar, pipe, etc... and coat
    the surface inside.

    II.  Once the gas has evaporated, put in a few drops of Pot.
    Permangate, and close the jar shut.

    Throw the jar at your target, or the truck under you, or into the
    crowd at the mardi-gras and be far away.  This bomb will pack 1/2
    stick of standard GCM dynamite.  Handy, indeed.
                            
    ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
 

EFFECTIVE NECK-BREAKING TECHNIQUES

  
                 *Crossneck*

    This method will only work if you are much taller (1 1/2 - 2 feet)
    than your target, or the target is sitting down (guards, teachers,
    etc.)

    Approach the target from the behind SLOWLY as not to startle, then
    place your left arm around the neck, and the right arm across the
    neck (over the left) and grab your upper-left arm with your right
    arm.  Move the right arm upward sharply, and the left arm left firmly
    around the neck.  Pop the neck out of the spinal cord, and separate
    the head from the rest of the body. The neck should be quite
    twistable now.  Damage the spinal cord, so the victim has little/no
    hope for survival.  Don't even think about whipping out a knife.
  
    This method is for killing without leaving a single mark.

                   *Throat demolition*

    When using this technique, be sure to rid your conscience of any
    regrets while attempting this.  You will be staring your victim eye-
    to-eye, and you don't want to cower out.  Your victim will have a
    scared-shitless look of "Why me?" They will look so innocent, it
    might make you chicken out.  Check out "The Cypher's guide to the
    elimination of the conscience" if you have these problems.  It could
    mean the difference between life and death...

    Creep up to your mark while they are leaning over (reading, loading
    gun, etc.) Stare down at what they're doing by their RIGHT side, then
    place the left arm around the neck from the underside. In other
    words, extend the right arm under their chin, then reach back around
    to the back of the head.  Grab the neck tightly, place your shoulder
    on their chest, flip them over onto the table or floor, then punch
    them AS HARD AS YOU CAN right in the throat.

    I'm not sadistic (yeah, sure, you say,) and I am somewhat of an
    animal lover, but a good way to practice this technique is with pigs.
    Go down to any forestry project, and then find out where some of the
    pigs are...  This will not be too hand to do.  Just look for severe
    underbrush.  Wait, and they will come. Ambush from behind, and the
    pigs neck is yours.  Im not sure if this kind of hunting is legal
    (bare hands) but it is essential for proper exercises in the art of
    the elimination of the conscience.

A S S A S S I N A T I O N T E C H N I Q U E S

  
    Preface
    -------
    If you do indeed take the information provided in this article
    seriously enough to do it, please forget where you read it.

    Poisons:
    --------
    The first and probably least known way to maim(such a nice word)
    someone is through the use of various herbal extracts..(no I don't
    mean Sinsemella)

    Diffenbachia (dumbcane)
    =-=-=-=-=-=-=-=-=-=-=-=
    Take 2-4 of the leaves and boil them in water (don't inhale the
    fumes) When the water becomes a greenish color, take the leaves and
    throw them away..Now take the liquid and add it to the victims
    drink,food etc..The victims voice goes kaput.

    Oleander.
    =-=-=-=-=
    Take a twig of this bush and grind it into a fine powder..Place the
    powder in the salt shaker,or sub-stitute it for any other type of
    seasoning...Causes death within 3-4 hours...sometimes quicker

    Poison Oak/Ivy.
    =-=-=-=-=-=-=-=
    Take the leaves and do the above process..Or boil the leaves and when
    the water turns brownish/green pour it out into a vial...Add a few
    drops to the victims beverage.. It tends to destroy the victims vocal
    cords...

    Systemic roses.
    =-=-=-=-=-=-=-=
    Take a rose bush and soak the ground around it with a very poisonous
    fertilizer..In the days following the roses leaves,stems,etc will
    become highly deadly..When the victim gets scratched by it..He/she
    dies..

    Poisons Part 2
    --------------
    The second and more common poisons are that of deadly metals and
    earthy extracts.

    Sodium Arsenide.
    =-=-=-=-=-=-=-=-
    This along with Lead Arsenide rank in the top ten of lethal
    materials Sodium Arsenide can be acquired at a glass staining shop..It
    is placed into the victims food,etc.

    Potassium Cyanide.
    =-=-=-=-=-=-=-=-=-
    This is chemical is contained in appleseeds..To get it you must grind
    up about 12 oz of apple seeds ..The effect is close to radiation
    poisoning...It kills within 6 hours

    
    Curare.
    =-=-=-=
    This substance is basically a ba28rd poison..It is various poisons
    combined into a lethal dosage..It kills within 45 minutes.

    Lead.
    =-=-=
    Although this material is very common it is also very deadly..Take
    about 30-40 grams of lead shavings(dust) and put them in someone's
    food.. It does wonders....<ack!>

    Mercury.
    =-=-=-=-
    Mercury is a highly deadly material that kills skin on contact...To
    use most effectively,place about 20 grams wherever the victim might
    place his hand or any other part of his body for that matter..Or
    place it in his food supply...It to does wonders...<ack!>
  
    Others (Unknown!)
    =-=-=-=-=-=-=-=-=
    Although it is impossible to list all of the deadly substances here I
    will show how to make contact poison...

    (credit to Ima Hacker) take 3 no-fly pest strips (tm) place them in a
    jar of turpentine overnight..In the morning scoop out the white/brown
    gel at the bottom.

    it kills in 60 seconds..Count 'em

    (again credit must go to Ima Hacker)

    Highway Accidents???
    --------------------
    The following section describes various was to seriously harm the
    occupant by destroying the victims car...

    Explosions
    =-=-=-=-=-
    Take a film canister filled with liquid drano and drop it into the
    gas tank...Do this just before your target enters his car...When he's
    driving down the freeway or any other part of the HTS his car will
    suddenly become engulfed in flame.

    Carbon Monoxide (CO)
    =-=-=-=-=-=-=-=-=-=-
    Drill a small hole into the exhaust system of the victims car..From
    it run a length of tubing into the passenger compartment..After 20
    minutes he will fall onto the floor and most probably die when he
    hits something.

    Stuck Accelerator
    =-=-=-=-=-=-=-=-=
    Find the victim's throttle cable and cut it..now follow the piece
    coming out of the manifold..Now supposing you found where it
    intersects the valve...There should be a small spring there that
    keeps the valve closed...Cut it...push the valve open....clean
    up...When Mr. Victim starts his car the engine will race. when he
    shifts he should fly out of control down the roadway..until <KERASH>